Home > Configuration > Ica

Use this method to this method creates an ica accessprofile that specifies status of the features (DEFAULT/DISABLED).

Use this method to creates an ICA action, which is used to specify the ICA accessprofile.The action can be associated with an ICA policy by using the add ica policy method

Use this method to this method creates an ica latencyprofile with the options specified.

Use this method to this method adds an ICA policy. The policy specifies the rule, on which the traffic is evaluated, and the action to be taken if the rule returns "TRUE".

Use this method to bind policy to ica global.

Use this method to get details of the specified ica accessprofile. If no accessprofile is specified, displays a list of ica accessprofiles on the Citrix ADC.

Use this method to get method displays details of the specified ica action. If no profile is specified, displays a list of ica actions on the Citrix ADC.

Use this method to get the ICA global bind points and the number of policies bound to each global bind point, or more detailed information about the specified bind point.

Use this method to get details of the specified ica l7latencyprofile. If no l7latencyprofile is specified, displays a list of ica l7latencyprofiles on the Citrix ADC.

Use this method to get the global ica configuration

Use this method to get method displays information about all configured ICA policies, or detailed information about the specified policy.

Use this method to this method renames an ICA action.

Use this method to this method renames an ICA policy.

Use this method to this method removes the specified ica accessprofile.

Use this method to this method removes the ica action specified

Use this method to this method removes the specified ica l7latencyprofile.

Use this method to this method removes an ICA policy

Use this method to set allow Default access/Disable applications hosted on the server to play sounds through a sound device installed on the client computer, also allows or prevents users to record audio input

Use this method to set allow Default access/Disable the clipboard on the client device to be mapped to the clipboard on the server

Use this method to set allow Default access/Disable COM port redirection to and from the client

Use this method to set allow Default access/Disables drive redirection to and from the client

Use this method to set allow Default access/Disable client printers to be mapped to a server when a user logs on to a session

Use this method to set allow default access or disable TWAIN devices, such as digital cameras or scanners, on the client device from published image processing applications

Use this method to set allow Default access/Disable the redirection of USB devices to and from the client

Use this method to set allow Default access/Disable automatic connection of LPT ports from the client when the user logs on

Use this method to set allow default access or disable drag and drop between client and remote applications and desktops

Use this method to set allow default access or disable FIDO2 redirection

Use this method to set allow Default access/Disable file/data sharing via the Receiver for HTML5

Use this method to set allow Default access/Disable the multistream feature for the specified users

Use this method to set allow default access or disable smart card redirection. Smart card virtual channel is always allowed in CVAD

Use this method to set allow default access or disable WIA scanner redirection

Use this method to set name of the ica accessprofile to be associated with this action.

Use this method to set name of the ica latencyprofile to be associated with this action.

Use this method to set l7 Latency Max notify Count. This is the upper limit on the number of notifications sent to the Insight Center within an interval where the Latency is above the threshold.

Use this method to set enable/Disable L7 Latency monitoring for L7 latency notifications

Use this method to set l7 Latency Notify Interval. This is the interval at which the Citrix ADC sends out notifications to the Insight Center after the wait time has passed.

Use this method to set l7 Latency threshold factor. This is the factor by which the active latency should be greater than the minimum observed value to determine that the latency is high and may need to be reported

Use this method to set l7 Latency Wait time. This is the time for which the Citrix ADC waits after the threshold is exceeded before it sends out a Notification to the Insight Center.

Use this method to set enable/Disable DF Persistence

Use this method to set enable/Disable EDT Loss Tolerant feature

Use this method to set enable/Disable DF enforcement for EDT PMTUD Control Blocks

Use this method to set dF enforcement timeout for EDTPMTUDDF

Use this method to set enable/Disable EDT PMTUD Rediscovery

Use this method to set enable/Disable Session Reliability on HA failover. The default value is No

Use this method to set enable/Disable HDXInsight for Non NSAP ICA Sessions. The default value is Yes

Use this method to set enable/Disable HDX Insight data to Director even if HDX Insight policy is not configured on Gateway and Network Telemtry policy is enabled on VDA.

Use this method to set specify the time interval/period for which L7 Client Latency value is to be calculated. By default, L7 Client Latency is calculated for every packet. The default value is 0

Use this method to set name of the ica action to be associated with this policy.

Use this method to set any type of information about this ICA policy.

Use this method to set name of the messagelog action to use for requests that match this policy.

Use this method to set expression or other value against which the traffic is evaluated. Must be a Boolean expression.

The following requirements apply only to the Citrix ADC CLI:
* If the expression includes one or more spaces, enclose the entire expression in double quotation marks.
* If the expression itself includes double quotation marks, escape the quotations by using the \ character.
* Alternatively, you can use single quotation marks to enclose the rule, in which case you do not have to escape the double quotation marks.

Use this method to unbind policy from ica global.

Remove ica accessprofile clientaudioredirection setting.

Remove ica accessprofile clientclipboardredirection setting.

Remove ica accessprofile clientcomportredirection setting.

Remove ica accessprofile clientdriveredirection setting.

Remove ica accessprofile clientprinterredirection setting.

Remove ica accessprofile clienttwaindeviceredirection setting.

Remove ica accessprofile clientusbdriveredirection setting.

Remove ica accessprofile connectclientlptports setting.

Remove ica accessprofile draganddrop setting.

Remove ica accessprofile fido2redirection setting.

Remove ica accessprofile localremotedatasharing setting.

Remove ica accessprofile multistream setting.

Remove ica accessprofile smartcardredirection setting.

Remove ica accessprofile wiaredirection setting.

Remove ica action accessprofile setting.

Remove ica action latencyprofile setting.

Remove ica latencyprofile l7latencymaxnotifycount setting.

Remove ica latencyprofile l7latencymonitoring setting.

Remove ica latencyprofile l7latencynotifyinterval setting.

Remove ica latencyprofile l7latencythresholdfactor setting.

Remove ica latencyprofile l7latencywaittime setting.

Remove ica parameter dfpersistence setting.

Remove ica parameter edtlosstolerant setting.

Remove ica parameter edtpmtuddf setting.

Remove ica parameter edtpmtuddftimeout setting.

Remove ica parameter edtpmtudrediscovery setting.

Remove ica parameter enablesronhafailover setting.

Remove ica parameter hdxinsightnonnsap setting.

Remove ica parameter insightonlytodirector setting.

Remove ica parameter l7latencyfrequency setting.

Remove ica policy comment setting.

Remove ica policy logaction setting.