| setinterface_autoneg |
Use this method to set auto-negotiation state of the interface. With the ENABLED setting, the Citrix ADC auto-negotiates the speed and duplex settings with the peer network device on the link. The Citrix ADC appliance auto-negotiates the settings of only those parameters (speed or duplex mode) for which the value is set as AUTO. |
Syntax |
Parameters |
id |
ID of the Interface whose parameters you want to modify.
For a Citrix ADC, specify the interface in C/U notation (for example, 1/3).
For a cluster configuration, specify the interface in N/C/U notation (for example, 2/1/3).
where C can take one of the following values:
* 0 - Indicates a management interface.
* 1 - Indicates a 1 Gbps port.
* 10 - Indicates a 10 Gbps port.
U is a unique integer for representing an interface in a particular port group.
N is the ID of the node to which an interface belongs in a cluster configuration.
Use spaces to separate multiple entries. This is mandatory parameter. |
autoneg |
Auto-negotiation state of the interface. With the ENABLED setting, the Citrix ADC auto-negotiates the speed and duplex settings with the peer network device on the link. The Citrix ADC appliance auto-negotiates the settings of only those parameters (speed or duplex mode) for which the value is set as AUTO. Default value = NSA_DVC_AUTONEG_ON. Possible Values : DISABLED, ENABLED. |
Return Value |
Returns simpleResult |
See Also |